skip to content

Interested in what more we have to offer?
Click here to join our mailing list
BSI logo BBA logo
build green | build for life

Top TipsTop Tips

Currently showing Tips: 7 to 11 (of 11 Tips)Previous Page | Next Page

Q) What should be used to drill the gutter?
A) Hole size is 8mm (5/16") and should be positioned centrally 20mm from the spigot of the gutter.

The hole in a fitting socket will provide a useful template. We recommend the use of tungsten tipped drills.
Date Posted: Thursday 18 September 03
Q) What is the recommended method of sealing the downpipes?
A) The rainwater pipes should be left unsealed so as if there is a blockage it will overflow at the lowest level. The pipe sockets should be wedged, using wedges made up from sheet lead cut into 30mm strips, rolled and tapped, between socket and pipe. This should be inserted in 3 places to avoid any rattle. Click here for more information.
Date Posted: Thursday 18 September 03
Q) What is the recommended bracket spacing?
A) Click here for further information.
Date Posted: Thursday 18 September 03
Q) What type of sealant is required?
A) Click here for comprehensive information.
Date Posted: Thursday 18 September 03
Q) How do you seal the gutters?
A) Click here for comprehensive information.
Date Posted: Thursday 18 September 03