Classical Express Clip Assembly

Step 1: Slacken bolt to the fullest extent.	Step 2: Locate the gasket centrally within the clip assembly ensuring the seal ends are positioned within the locating lugs.	Step 3: Locate the back section on the rear gutter edge and ensure clip is positioned equal distant to each end of the gutter. Note: In the case of fittings, use the joint location lugs as a guide.
Step 4: Bring the front section forwards and clip onto the front edge of the gutters. Re-check the position and bolt up tight.	Step 5: Typical appearance of assembled joint.	For further details also see Classical Installation Guide.